Views:0 Author:Site Editor Publish Time: 2018-02-08 Origin:Site
As we know, fiber laser cutter requires suitable working environment, when the whether is below 0 degrees celsius, customer should take some measures to enable machine working normally. Today, LEIMING LASER will share a few helpful hints for using fiber laser cutter in winter.
Fiber laser generator
1.When fiber laser generator is required to run continuously
We recommend customer using industrial anti-freezing liquid in the water chiller.
2.When fiber laser generator is not required to run continuously
For medium power fiber laser generator, we need to keep the water chiller running at night.?
For high power fiber laser generator(maximum power is above 2000W), it shall be kept opening?and ensure that the water chiller cooling liquid in a circulating state.
1, install air conditioner or heating facilities to keep the ambient temperature at about 10 degrees Celsius.
2, Run the water chiller in 24 hours.
3, Add ethylene glycerin antifreeze liquid into the water tank.
4, If the fiber laser cutting machine do not used for a long time, it is necessary to empty the water in the refrigerator's water tank.
1. Turn off the power supply, open the drain valve behind the water chiller, drain the water in the tank.
2. Unscrew the filter inside the water chiller and drain the water inside the filter.
3. Unscrew the drain screw below the pump and drain the water in the pump.
4. Empty the water inside the fiber laser generator and laser head.
These are the using notes in winter. It is necessary for customers to master these measures. For more maintenance measures about fiber laser cutter, just contact us as soon as possible.