The water chiller is the important part of fiber laser cutter. It enables that the fiber laser cutter can work normally at a constant temperature. Here are some notes of using fiber laser cutter water chiller. 1. Make sure the power outlet is in good contact, the ground wire is reliably grounded.

Fiber laser cutting machine is popular with customers in that it has high precision and high cutting performance. There are many reasons that fiber laser cutter appears an error, today LEIMING LASER will show you the reasons. The first reason, the cutting thickness exceed the standard. The thicker t

Galvanized sheet is a common material which is widely used in modern industries. The characteristic of the galvanized sheet is it can prevent the steel surface from being corroded. Today, LEIMING LASER will introduce you to the solution for processing galvanized sheet with a fiber laser cutter.

There are many common accessories of fiber laser cutting machine, these accessories need to be replaced frequently due to the wastage during the use of fiber laser cutting machine. Today, LEIMING LASER will introduce you to these accessories.

Users should not only learn to use the machine correctly, but also understand the principle and regularly maintain it.

The cutting quality of fiber laser cutter machine is a matter of concern to the customers. If you want to cut a satisfactory sample, you need to use the laser cutting machine scientifically.The following three points will show us how to judge the quality of cutting and learn how to make a high-quality cutting with fiber laser cutter.

The position of the focus is different, and the applicable conditions are different.

For the fiber laser cutting machine, laser power density has a great influence on the cutting speed, so the selection of the focal position is particularly important.

When your fiber laser cutting machine shows accuracy errors, may has the following problems.

It is well known that copper is a high reflection material with good thermal conductivity. How to process copper materials? We can use many equipment such as fiber laser cutter, plasma cutting machine, etc. Today, LEIMING LASER will show you the solution of fiber laser cutter to process copper materials.